1.Latest Software version is 2.50
2.Latest update: VW GOL (Kostal immo box) , ME 7.xx engine ECU’s PIN code reading
(This means:VW Passat B6, Bora/Jetta, Polo to 2004 year, Golf 4, Sharan to 2003 year,Skoda Octavia/Fabia to 2004 year , some Seat dashes up to 2004 year ect…)
3.Direct USB to OBD Connection. All hardware inside OBD connector.
4.VAG Kombiinstrument / Immo box eeprom programmer…by OBD connector.

Function:
All this by using car OBD connector. Without disassembly dash or immo box from car.
Automatic functions: Change mileage, Read PIN code.

Support list:
1.Bosch/Motometer dashes for VW 2001-2003 years V07.04, V07.05, V07.08, V07.13 (with scan for 2′nd pass)
2.Audi A4,A6,A8 separate immo box 1994-1999 read PIN code,and read/write eeprom!
3.Audi A3,A4,A6,TT, New Beetle Magnetti Marelli M73 (1998-2003 year) read PIN code / change mileage!
4.New Beetle Magnetti Marelli M73 (2001 to 2005 year) read PIN code
5.Almost all VDO dashes for VW/Seat/Skoda up to year 2004 read/write eeprom.
6.Almost all VDO dashes for Audi up to year 2001 read/write eeprom.
7.Almost all MotoMeter dashes for VW/Seat up to year 2001 read/write eeprom.

Package List:
1pc x Tacho USB 2.5
1pc x CD Drive

Device Description:
Processor: ELM327 USB
OBD-II Protocols: ISO15765-4 (CAN)
ISO14230-4 (KWP2000)
ISO9141-2
J1850 VPW
J1850 PWM
Output protocol: RS232
Baud rate: 9600 or 38400
Indicator LEDs: OBD Tx/Rx, RS232 Tx/Rx, Power
Operating voltage: 12V, internal protection from short circuits/overvoltages
Nominal idle current: 45 mA
 
Features:
The program lets you perform the following operations:
Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
Clear trouble codes and turn off the MIL (“Check Engine” light)
Display current sensor data, including:
Engine RPM
Calculated Load Value
Coolant Temperature
Fuel System Status
Vehicle Speed
Short Term Fuel Trim
Long Term Fuel Trim
Intake Manifold Pressure
Timing Advance
Intake Air Temperature
Air Flow Rate
Absolute Throttle Position
Oxygen sensor voltages/associated short term fuel trims
Fuel System status
Fuel Pressure
Many others…

Upcoming Features:
Data graphing and logging
Freeze Frame data
Continuous and Non-Continuous Oxygen Sensor test results
Free software:
Scantool.net
GM Mode 22 Scan Tool by Terry
OBD Gauge for PalmOS and Pocket PC by Dana Peters
OBD Logger by Jonathan Senkerik
OBD-II ScanMaster by Wladimir Gurskij (ScanMaster 3.52 – local copy)
obd2crazy.com
OBD2 Scantool by Ivan Andrewjeski
OBDII for ELM322 by David Huffman
pyOBD by Donour Sizemore for MacOSX and Linux
RDDTC by Pete Calinski
Real Scan by Brent Harris
ScanTest for Pocket PC by Ivan Ganev aka a-ser
wOBD by WDT
 
Available cars:
Benz 2001/02/03 W203 C200K (ISO)
BMW X5 2002 (ISO) Chevrolet Aveo (ISO)
Citroen C3 2004 (ISO) ? Daihatsu YRV 2005 (ISO)
Daihatsu YRV Turbo 2006 (ISO)
Fiat Tipo 2002 (ISO)  
Ford New Focus 2006(CAN)
Honda Accord 2006 JDM (ISO)
Honda Accord Euro R 2004 JDM (ISO)
Honda City GD8 (ISO)
Honda Civic ES 1.6A (ISO)
Honda Integra Type R DC5 JDM (ISO)
Honda Jazz 1.4M (ISO)
Hyundai Accent 2004 (ISO)
Hyundai Getz 1.3A 2004 (ISO)
Hyundai Getz 1.6M 2004 (ISO)
Hyundai Matrix 2004 (ISO)
Hyundai Santa Fe 2.4A (ISO)
Hyundai Sonata GLS (ISO)
Hyundai Sonata 2005 (ISO)
Hyundai Tuscani FX (ISO)
Kia Carens 2005 (ISO)
Kia Magentis 2005 (ISO)
Kia Rio LS (ISO)
Kia Sorento SUV 2005 (ISO)
Lexus es300 Mazda 2 (CAN)
Mazda 5 (CAN)
Mazda 6 (CAN)
Mazda Premacy 2001 (ISO)
Mazda RX8 (CAN)
Mitsubishi Colt 2003 (ISO)
Mitsubishi Colt Plus 2005 (ISO)
Mitsubishi Eclipse(GST—–Turbo Car can be tested for the year 1995-2000 ；RS/GS—-1994-1996 GS all can do；Turbo Car for the year 1996-2000,only have speed and TPS，can clear the DTCS)
Mitsubishi Lancer Evolution IX 2006 (ISO)
Mitsubishi Pajero 3.5 V6 2006 (ISO)
Nissan Sunny B14 (ISO)
Nissan Sunny VIP FB15 (ISO)
Nissan X-Trail 2.0L 2004 (ISO)
Nissan X-Trail 2.5L 2004 (ISO)
Peugeot 206 2001 –Only can show RPM
Peugeot 206 (ISO)
Peugeot 307 (ISO)
Peugeot 407 (ISO)
Renault Megane II 2005 (ISO)
Renault Kangoo 2006 (ISO)
Subaru Impreza 1.6TS 2002 (ISO)
Subaru Impreza WRX 2005 (ISO)
Toyota Camry 2.0A 2004 (ISO)
Toyota Camry 2.4A 2005 (ISO)
Toyota Corolla Altis 1.6A 2005 (ISO)
Toyota Corolla GLXi G8 1999 (ISO)
Toyota Corolla G9 2002 (ISO)
Toyota Vios 2004 (ISO)
 
Not available vehicles:
Mazda 323 Protege 2003 (OBD-I)
Mitsubishi Lancer 1.6M 2006
Nissan Sunny (N16)
Nissan Cefiro (Teana) 2005
Nissan sentra 1.8 2000/2005
Nissan Cefiro (Teana) 2005
Proton Perdana V6
Subaru Legacy GT 2005
Toyota camry 2002
Toyota Wish JDM (Missing Pin 5 in DLC)
Toyota IST JDM (Missing Pin 5 in DLC)
Toyota altis 1.8 2004
Peugeot 206 2000
Suzuki Jimny 1.3 2000
Diesel engine

Package includes:
Elm327 main unit
One com interface
One USB cables
One CD software
 
FAQ: Frequently Asked Questions
Q: What is the difference for the v1.5 elm327, the plastic elm327 and the bluetooth elm327?
A: There are the same functions for them, the only different is the interface: the v1.5elm327 has both usb com interface, the plastic elm327 just has usb interface, and the bluetooth elm327 just has no cable ,it works by the bluetooth.

Features:
- read and delete errors
- adaptations
- driver programming
- applu coding
- and others…Works with: INPA , SSS , Progman and others

Supports Protocols:
1. Fast magistral D-CAN and PT-CAN (500 kbit/s)
2. Slow magistral K-CAN (100 kbit/s)
3. Standard BMW protocol (BMW OBD interface).

D-CAN for:
- E60, E61 od 03/2007
- E83 od 09/2006
- E81, E87 od 03/2007
- E90, E91, E92, E93 od 03/2007
- E70 (new model X5)
- R56 (new model MINI)

PT-CAN, K-CAN – fully switchable speed of migistral CAN – ou can diagnose driver withtou any car
Protocol “BMW OBD interface” for older cars:
- from 1995 to 1998 (don’t need K-line).
- from 1998 to 03/2007 (all models)

Package Contains:
- interface + CD
- manuals showsign diffrent coding

New features:
• The high-grade program module for work with ZKE (Body Control Module) Is added
• Functions of adaptation second-hand blocks SRS MRS2-MRS4 (in V1.25 – only MRS4) Are added
• Support of the diagnostic report of blocks DME of series ME7 Is added
• Functions of installation of indications odometer (miles/km) and language of messages BK
(GE/EN/FR/IT) Are added
• The base of support on updating run in IKE and LCM (LCM-4 up to 09.2004) Is added

Package Contains:
• software V1.3.6 (CD), or download it at HERE
• diagnostic adapter
• cable with BMW-20 connector
• cable with OBD-II connector
• RS232 cable

Remarks:
Reading of PIN for immo1 works only if pin code already have been entered sometimes before
Reading of PIN code for immo2 is not possible by OBD

Package Including:
1pc x OPEL IMMO Reader
1pc x CD Drive

Compatible Chips List:
68HC912DC128A (3K91D)
MC68HC912DC128 (0K50E)
MC68HC912DG128 (5H55W)
MC68HC912DG128A (3K91D)
MC68HC912DG128A (0K50E)
MC68HC912D60A(2K38K)
MC68HC912B32 (4J54E)
MC68HC912B32 (9H91F)
MC68HC912D60 (0K75F)
MC68HC912D60 (0K13J)
MC68HC912D60 (4F73K)
MC9S12D64 (2L86D)
MC9S12DG128B (OL85D)
MC9S12DT128B (OL85D)
MC9S12A128B (OL85D)
MC9S12DB128B (OL85D)
MC9S12DT128B (1L85D)
MC9S12H128 (1K78X)
MC9S12 DT128B (3L40K)
MC9S12DG256C (2K79X)
MC9S12DT256C (2K79X)
MC9S12DP256C (2K79X)
MC9S12H256 (1K78X)
MC9S12DP512 (1L00M)

Additional items you’ll need to use this tool
1. Host: A 32 Bit x86 based or Pentium PC with a free LPT communication port.
2. Power supply: An 12 Volt / 500 mA power adapter.

Package List:
1pc x 9S12 programmer
1pc x HC912 QFP80 adapter
1pc x MC9S12 112QFP adapter
1pc x MC9S12 80QFP adaper
1pc x HC912 QFP112 adapter
1pc x MC9S12H256 144QFP adapter

Description:
Powered by Autel Uni-SCAN™ technology, the MaxiDiag™ FR704 is an innovative multi-functional scan tool designed for technicians to troubleshoot Engine, Transmission, ABS & Airbag systems for Renault/Citroen/Peugeot. Reliable, easy-to-use and affordable, the MaxiDiag™ FR704 is a time saver and a money maker.

Feature:
1.Troubleshoots Engine Transmission ABS & Airbag Systems.
2.Global OBD2 – EOBD Coverage (US, Asian & European).
3.Supports all 9 Modes ofthe latest J-1979 OBD2 test specs.
4.Retrieves generic {PO,P2, P3 & UO} and Manufacturer Specific { P1, P3, & U1} Codes.
5.Displays DTC Definitions on- screen.
6.Views FREEZE FRAME DATA.
7.Displays O2 Sensor Data, as well as Live Datastream Parameters.
8.Data Graphing 1996 and later vehicles.
9.Reads, stores and playback of Live Sensor Data.
10.Memory/ Battery backup for off vehicle data review and analysis.
11.Performs Modules Present test.
12.Retrieves Vehicle Information. – VIN – CID – CVN.
13Supports all current OBD2 Protocols, including CAN {Controller Area Network}.
14.Easy to use and highly reliable.
15.Software up-gradeable via internet.
16.Built in OBD2 code Library.
17.Prints Data via PC.

Vehicle List:
1.RENAULT: 1996-2008
CLIO 2
CLIO 3
CLIO V6
ESPACE
ESPACE IV
KANGOO
LAGUNA
LAGUNA 2
MEGANE
MEGANE 2
SCENIC
TWINGO
TRAFIC
AVANTIME
MASTER
MODUS
THALIA
VERSATIS
VERSATIS2

2.PEUGEOT: 1996-2008
1O6
106R
107
206
207
306
306R
COUPE
307
405
406
406R
407
607
806
807
BOXER
EXPERT
PARTNER

3.CITROENC1: 1996-2008
C2
C2 CHINE
C3
C3 PLURIEL
C3 RESTYLED
C4
C4 SEDAN
C4 PICASSO
C5
C6
TRIOMPHE
XSARA
ELYSEE
BERLINGO
XANTIA
SAXO
XM

4. Global OBD II compliant US, European & Asian vehicles.

Package List:
User’s Manual
OBD2 cable
USB cable
1.5V battery X 4
Nylon carry case

Function:
1.Read Trouble Code
2.Clear Trouble Code
3.ECU ID
4.Read Data Stream
5.Active Test

Specification:
1.Systems supported
MPI/GDI/DIESEL,ELC-AT/CVT,ABS ,SRS-AIR BAG,FULL AUTO A/C,ECS,IMMOBILIZER,AUTO CRUISE,TCL/STBLTY CNTRL,4WS,SS4II,HBB

2.Main features
Competitive price: About 10% cost of that of the professional device with the similar functions
On-board power charge
Simply connected to the car and run

3.Appearance
The appearance of a M608 is as shown in the above figure.
1). LCD screen: 128*64
2). Enter key: confirm selection and enter
3). Esc key: go back to the previous screens
4). up/down arrows: moves the selection pointer and scrolls up or down

4.Dimension:27CM*20CM*7CM

This fault code reader has powerful functions, which can support all Toyota cars, with smart outlook, competitive price and convenient operation. It is a separately- operated tool without help of PC.

1. Function Introduction
Fault Codes
Clear Codes
Read Data Stream
Active Test
Function Test

2. Systems Supported
T605 can work on the following systems:

WITHOUT CANBUS SYSTEM:
1). POWERTRAIN
ENGINE AND ECT
BATTERY
CCS
HV BATTERY
HV ECU
EV
STOP AND GO
SEQUENTIAL MT
LASER CRUISE

2). CHASSIS
ABS
AIRSUS
EMPS|EHPS
FREE-TRONIC
TIRE PRESSURE
VGRS
KDSS
T_M CONTROL

3). BODY
AIR CONDITIONER
SRS AIRBAG
BODY
BACK-DOOR
D-DOOR
P-DOOR
RR-DOOR
RL-DOOR
D-SEAT
P-SEAT
RR-SEAT
RL-SEAT
REAR SEAT SW
GATEWAY
METER
MIRROR
COMBI SW
ENTRY/START
POWER SOURCE CONTROL
RTRCTBL HARDTOP
CLEARANCE SONAR
SLIDE ROOF
STEERING PAD
TILT/TELESCO
AFS
MASTER SW
RAIN SENSOR

4). IMMOBILIZER
CANBUS SYSTEM

1). POWERTRAIN
ENGINE AND ECT
ECT
MULTI-MODE M/T
CRUISE CONTROL
HVl BATTERY
HYBRID CONTROL
LASER CRUISE
RADAR CRUISE
E-ACM

2). CHASSIS
ABS
FOUR WHEEL DRIVE
EMPS
INTELLGENT PARKING ASSIST

3). BODY
SRS AIRBAG
AIRl CONDITIONER
PRE-CRASH
COMBINATION METER
ELECTRIC POWER CONTROL

3. Main Features
 • Competitive price: About 10% cost of that of the professional device with the similar functions
 • With powerful functions: can realize most functions of Intelligent Tester II.
 • On-board power charge
 • Conveniently connection and simply using

4. Appearance and Key Descriptions
The appearance of a T605 is as shown in the above figure.
1). LCD screen: 128*64
2). Enter key: confirm selection and enter
3). Esc key: go back to the previous screens
4). Up/down arrows: moves the selection pointer and scrolls up or down
5). LEFT/RIGHT arrows: move cursor.
6). Power button
7). Diagnostic extension cable: OBDII

Feature:
Works on all 1996 and later OBDII compliant US, European and Asian vehicles.
Easily determines the cause of the Check Engine Light (MIL).
Read hard (memory)pending (intermittent) and historic codes and show definitions .
Turns off Check Engine Light (MIL), clears codes and resets monitors.
Reads live datastream .
Views freeze frame data.
I/M monitor readiness test.
Displays live O2 sensor test data.
Displays On-board monitor test results.
Check if Vehicle components work status.
Retrieves vehicle information (VIN, CIN and CVN).
Display Current trip Information (Distance, Fuel used, Avg Speed).

Language: English
Supports CAN (Controller Area Network) and all other current OBD-II protocols.
Built-in OBD-II Fault code lookup library.
Software upgradeable via internet.

Package Including:
1pc x OBDMATE OM520 New Model Code Reader main unit
1pc x OBD2 main cable
1pc x USB update cable
1pc x CD with user manual